home *** CD-ROM | disk | FTP | other *** search
- Oak Technology, Inc. Copyright 1994-1995
-
-
- Mozart Sound System Installation Procedures
-
-
- If your system does not contain the Mozart driver, simply go to the Mozart
- drive diskette you have just created and run INSTALL.
-
- C:\>A: [Enter] (If it is a B: drive type in B: [Enter])
- A:\>INSTALL [Enter]
-
- Then follow the instruction on the screen to install the driver.
-
-
- If your system has a previous version of Mozart Sound System installed
- already, please first run DEINSTAL from the Mozart driver diskette to
- delete the old version. To run, at the A:\ drive, type in DEINSTAL.
-
- A:\>DEINSTAL [Enter]
-
- During DEINSTAL You will be prompted the location of the previous Mozart
- driver in your system in order to remove the driver completely.
-
- After DEINSTAL, you should reboot your system, then from the floppy run
- INSTALL.
-
- A:\>INSTALL [Enter]
-
-
- To do the above installation or uninstall under Windows 95, you have to
- reboot your system to MS DOS MODE. To do that, simply Shut down
- Windows 95 and select RESTART THE COMPUTER IN MS-DOS MODE. Then follow
- the instruction above to DEINSTAL / INSTALL the Mozart driver.
-
- Thank you for using Oak's product. If you have any technical question
- regarding this installation procedure or any of our products, please feel
- free to contact us at Oak Technology.
-
- Voice number for technical Support: (408) 523-6536
-